Glass etching is actually seen both in professional and non-public industries. It might be lettering on the glass award or perhaps a decoratively etched logo or even crest. Similarly it could be seen as an etched logo design on the decanter for a corporate and business product or possibly a stylishly etched wine glass on the wedding table.
The style will be produced by the sandblasting, laser engraving or acid-etching onto the glass awards. It has the effects of making the glass translucent by scattering of light throughout transmission, therefore making the involved area whiter and gives a fostered look when compared to untreated places.
Sand blasting is the standard method of applying the design to the glass and requires blasting Aluminum Oxide on the glass. The actual glass award must be prepared before the glass etching can be began. The look must be produced and made as a mask to become applied to the glass award, when this has been done the award can be used into a sealed sandblasting machine to become blasted along with Aluminium Oxide using and air gun. The Aluminium Oxide hits the unmasked places on the actual glass, removing the shine as well as making a frosted effect. This technique of Glass Etching can be applied to complicated ‘less flat’ designs because the mask is applied by hand, it also can be utilized upon more detailed designs because of the Aluminum Oxide fine grain and does not fracture the actual glass.
Laser Engraving uses a powerful laser beam to plot a design on the glass; this technique can easily be an efficient way for awards and is the cleanest method to engrave without the chemicals. Laser engraving is primarily used onto flat areas and uses a Laser to heat the glass region in order to ‘fracture’ the smoothness of the glass, leaving a frosted look. Laser engraving can be a economical way of applying the design on the glass because there is no waste materials, hazardous substances or preparing necessary for the glass. The actual down side to Laser engraving could be the end result may look fractured on small text as well as intricate designs.Laser engraving can offer one-off individually etched glasses or even many glasses with just one message on all. Organization logos may be etched successfully or excessive cost because every glass will be laser etched individually name changes can be simply integrated without costly set up costs being incurred.
Acid-etching had been usually done in two periods. Firstly the whole glass is etched to a matt finish. This is followed by a different kind of acid-etch to create back a few places to a clear finish. Acid-etched is no longer manufactured due to safety reason. Places like China do after which the actual completed product will be exported. This technique is now primarily useful for large panels and is used within commercial structures and residential homes. The actual glass sections may be part of a privacy screen or perhaps a decorative feature in the specific environment.
Often, with regards to the quality of the glass and also the impact wishing to be achieved, laser engraving and sandblasting are often the best choice for glass awards. Essentially laser engraved glass pictures is going to be finer and on the surface whereas sandblasted glass will have more interesting depth.
Glass Awards
Different kinds of Glass Etching with regard to Aw 